Fördelar med att handla på DJI Stockholm
✔ Sveriges snabbaste och bästa support på drönare.
✔ Officiell DJI butik.
✔ Full garanti.
✔ Lagar om olyckan är framme.
✔ Alltid först i Sverige med nya modeller.
✔ Snabb leverans.

Zenmuse H20T

124 999,- SEK (inkl.moms)

Streckkod: 6958265100970

  • Stockholm (butik & online order): Ej på Lager
  • Webblager (endast online order): 23

IP44-klassad värmekamera på 640px samt zoomkamera på 20MP. Maximalt 23x optisk zoom + range finder med 1200 m räckvidd.
Enterprise Shield Basic ingår utan extra kostnad!

Enterprise Shield kopplas automatiskt till H20T, när du aktiverar din enhet första gången via DJI Pilot appen. All information dyker upp i appen.

H20T – Quad-Sensor Solution

  • 20 MP Zoom Camera
  • 12 MP Wide Camera
  • 1200 m LRF
  • 640×512 px Radiometric Thermal Camera

Klicka här för mer information och beställning

Dela produkten

  • Produktinformation
  • Material
  • VANLIGA FRÅGOR OCH SVAR
 

Vad är H20- och H20T-kamerorna?

H20 och H20T är IP44-märkta multisensorkameror som säkerställer uppdragseffektivitet för en mängd kommersiella drone-applikationer, inklusive brandbekämpning, brottsbekämpning och sökning och räddning, samt kraftledningsinspektioner och inom olje- och gassektorn.

Med 200x max. Zooma kan du se mer än någonsin tidigare med drone-kameran.
Huvudfunktionerna i dessa nyttolast, designade exklusivt för DJI Matrice 200RTK:

 
Zenmuse H20 - Triple-Sensor Solution
  • 20MP zoomkamera
  • 12MP vidvinkelkamera
  • 1200m Laser avståndsmätare
Zenmuse H20T - Quad-Sensor Solution
  • 20MP zoomkamera
  • 12MP vidvinkelkamera
  • 1200m  Laser avståndsmätare
  • 640 × 512 px Radiometrisktermisk-kamera

Zenmuse H20 & H20T-funktioner
H20-serien är full av en mängd intelligenta funktioner som hjälper dig att förvandla dina drone-uppdrag och samla snabba, exakta och pålitliga data.


Dessa funktioner inkluderar:

Nyttolast med flera sensorer

H20-serien är en verkligt allt-i-ett-lösning som hjälper dig att se hela bilden utan att sakna detaljer.

H20-serien har ett allt-i-ett-användargränssnitt som gör att du snabbt kan växla mellan vidvinkel, zoom och termisk avbildning, samt förhandsgranska zoom-FOV när du är i vidvinkel eller termisk kameravyn.

AI Spot Check

Denna funktion låter dig automatisera rutinmässiga inspektioner och fånga exakta data, gång på gång.

Avsluta i ett ämne av intresse, och AI ombord känner igen detta i efterföljande uppdrag, för att säkerställa konsekvent inramning och så att du kan övervaka ett visst ämne under en tidsperiod.

PinPoint

Markera ett objekt med ett snabbt tryck och ta reda på koordinaterna omedelbart.


Smart Track

Hitta och spåra rörliga motiv med funktionen för automatisk zoom medan du förvärvar din dynamiska plats.

 

Zenmuse H20T termisk prestanda

Samla viktig information med H20T-termosensorn för att hjälpa dig med en mängd olika uppgifter, från att hitta en saknad person, till att upptäcka hotspots under en brand eller inspektera din egendom. Detta är avgörande för att öka effektiviteten, maximera resultaten, hålla personalen säker och få värdefull situationell medvetenhet och insikt.

 
Viktiga funktioner hos värmekameran inkluderar:

Spotmeter

Tryck på en punkt för realtidsavläsning av yttemperaturen.

Områdesmätning

Välj ett område för att visa de lägsta, högsta och medeltemperaturerna.

Temp-alarm

Få omedelbar meddelande i DJI Pilot när objektets temperatur överskrider de förinställda varningsvärdena.

Isotermer

Visualisera ett specifikt temperaturband för att hitta vad som är viktigt.

Färgpaletter 

Justera färgerna som används på termisk data baserat på behoven i specifika scenarier.

Få modus

Justera förstärkningsläget för att ändra det fångade temperaturområdet: High Gain Mode täcker ett mindre temperaturområde men är mer känsligt för temperaturskillnader; Low Gain Mode täcker ett bredare temperaturområde.

R-JPEG-bilder

Foton tagna av Zenmuse H20T är i R-JPEG-format med inbyggd temperaturinformation. Genom att importera dessa bilder till DJI Thermal Analysis Tool kan du mäta temperatur och justera parametrar som Emissivity och Reflected Temp.

 
Specs
 
 

 

General

  • Weight

  • Zenmuse H20: 678±5 g
    Zenmuse H20T: 828±5 g
  • Dimensions

  • Zenmuse H20: 150×114×151mm
    Zenmuse H20T: 167×135×161mm
  • Ingress Protection Rating

  • IP44
  • Operating Temperature

  • -20° to 50° C (Temperature Measurement is only available between -10° to 50° C)
  • Storage Temperature

  • -20° to 60° C
  • Laser Safety

  • Class 1M (IEC 60825-1:2014)
  • Supported Aircraft

  • Matrice 300 RTK

Gimbal

  • Angular Vibration Range

  • ±0.01°
  • Mount

  • Detachable
  • Controllable Range

  • Pitch: -120° to +30°
    Yaw: ±320°
    Pitch: -120° to +30°
    Yaw: ±320°
  • Mechanical Range

  • Pitch: -132.5° to +42.5° 
    Yaw: ±330°
    Roll: -90° to +60°

Zoom Camera

  • Sensor

  • 1/1.7" CMOS, 20 MP
  • Lens

  • DFOV: 66.6°-4°
    Focal length: 6.83-119.94 mm (equivalent: 31.7-556.2 mm)
    Aperture: f/2.8-f/11 (normal),f/1.6-f/11 (night scene)
    Focus: 1 m to ∞ (wide), 8 m to ∞ (telephoto)
  • Focus Mode

  • MF/AF-C/AF-S
  • Exposure Mode

  • Auto, Manual
  • Exposure Compensation

  • ±3.0 (1/3 increments)
  • Metering Mode

  • Spot metering,Center-weighted metering
  • AE LOCK

  • Supported
  • Electronic Shutter Speed

  • 1 ~ 1/8000 s
  • ISO Range

  • Video: 100 - 25600
    Photo: 100 - 25600
  • Video Resolution

  • 3840x2160@30fps, 1920x1080@30fps
  • Video Format

  • MP4
  • Video subtitles

  • Supported
  • Photo Size

  • 5184 × 3888
  • Photo Format

  • JPEG

Wide Camera

  • Sensor

  • 1/2.3" CMOS, 12 MP
  • Lens

  • DFOV: 82.9°
    Focal length: 4.5 mm (equivalent: 24 mm)
    Aperture: f/2.8
    Focus: 1 m to ∞
  • Exposure Mode

  • Auto
  • Exposure Compensation

  • ±3.0 (1/3 increments)
  • Metering Mode

  • Spot metering,Center-weighted metering
  • AE LOCK

  • Supported
  • Shutter Speed

  • 1 ~ 1/8000
  • ISO Range

  • Video: 100 - 25600
    Photo: 100 - 25600
  • Video Resolution

  • 1920×1080@30fps
  • Video Format

  • MP4
  • Video subtitles

  • Supported
  • Photo Size

  • 4056 x 3040
  • Photo Format

  • JPEG

Thermal Camera (Zenmuse H20T)

  • Sensor

  • Uncooled VOx Microbolometer
  • Lens

  • DFOV: 40.6°
    Focal length: 13.5 mm (equivalent: 58 mm)
    Aperture: f/1.0
    Focus: 5 m to ∞
  • Digital Zoom

  • 1x, 2x, 4x, 8x
  • Video Resolution

  • 640×512 @ 30 Hz
  • Video Format

  • MP4
  • Image Resolution

  • 640×512
  • Image Format

  • R-JPEG* (16 bit)
  • Pixel Pitch

  • 12 μm
  • Spectral Band

  • 8-14 μm
  • Sensitivity (NETD)

  • ≤50 mK @ f/1.0
  • Temperature Measurement Method

  • Spot Meter, Area Measurement
  • Scene Range

  • -40 °C to 150 °C (High Gain)
    -40 °C to 550 °C (Low Gain)
  • Temperature alert

  • Supported
  • FFC

  • Auto/ manual
  • Palette

  • White hot/Fulgurite/Iron Red/Hot Iron/Medical/Arctic/Rainbow 1/Rainbow 2/Tint/Black Hot

Laser Rangefinder

  • Wave length

  • 905 nm
  • Measurement range

  • 3-1200 m (to a vertical surface with ≥12m diameter and 20% reflection rate)
  • Measurement accuracy

  • ± (0.2 m + D×0.15%)
    D is the distance to a vertical surface

Features

  • Hybrid Optical Zoom

  • 23×
  • Max. Zoom

  • 200×
  • One Click Capture

  • One click to save the video or picture of 3 cameras (zoom, wide and thermal camera) simultaneously
  • Point to Aim

  • Double click on the wide/thermal camera view, then the system will automatically move the gimbal to focus on the point of interest
  • High-Res Grid Photo

  • Frame an area of interest in wide camera view, and the zoom camera will automatically capture a set of 20 MP images of the area. These images are stored together with an overview image that can be viewed in greater detail.
  • Night Scene

  • Supported (zoom camera)
  • Timestamp

  • Including GPS, date and time

Storage

  • Supported SD Card

  • MicroSD card (Max capacity: 128 GB,UHS-1 Speed Grade 3 required)
  • Supported File Systems

  • FAT32 (≤ 32 GB), exFAT (> 32 GB)
  • Recommended Micro SD Cards

  • TOSHIBA EXCERIA PRO 32GB micro SD HC II
    SanDisk_Extreme PRO_32GB_3_A1_micro SD V30 HC I
    TOSHIBA EXCERIA PRO 64GB micro SD XC II
    SanDisk_Extreme PRO_64GB_3_A2_micro SD V30 XC I
    SAMSUNG_EVO_128GB_micro SD 3 XC I
    TOSHIBA EXCERIA M303E 32GB micro SD HC I
    TOSHIBA EXCERIA M303E 64GB micro SD XC I
    TOSHIBA EXCERIA M303E 64GB micro SD XC I
    TOSHIBA EXCERIA M303 128GB micro SD XC I
    SAMSUNG_EVO_64GB_micro SD 3 XC I
General
 
The Zenmuse H20 Series has 2 models: the Zenmuse H20 (Triple-sensor model with a wide-angle camera, a zoom camera, and a laser rangefinder) and the Zenmuse H20T (quad-sensor model with a wide-angle camera, a zoom camera, a laser rangefinder, and a radiometric thermal camera)
 
Under controlled laboratory conditions, the Zenmuse H20 Series meets the IP44 protection level under the IEC60529 standard. The protection level is not permanently effective, and will weaken with wear and tear.
• Make sure the gimbal connector interface and gimbal surface are dry and free of moisture before installing the gimbal.
• Before use, make sure that the gimbal is firmly installed onto the aircraft, and the SD card cover is clean, free of foreign objects, and securely closed.
• Before opening the SD card cover, wipe the surface of the body clean.
 
Radiometric thermal camera: R-JPEG, 640×512 px
Wide-angle camera: JPEG, 4056×3040 px
Zoom camera: JPEG, 5184×3888 px
 
Radiometric thermal camera: 640×512@30fps
Wide-angle camera:1920×1080@30fps
Zoom camera: 3840×2160@30fps / 1920×1080@30fps
 
MP4 encoded with H.264 compression
 
23× hybrid optical zoom, 200× max zoom
 
The higher the zoom factor, the longer the focusing distance.

1×-2.8×, the minimum focusing distance is 1 m.
2.9×-3.9×, the minimum focusing distance is 2 m.
4×-4.6×, the minimum focusing distance is 3 m.
4.7×-14.2×, the minimum focusing distance is 5 m.
14.3×-200×, the minimum focusing distance is 8 m.

If the object is within the minimum focusing distance, the camera will not be able to focus. For example, if the aircraft/payload is 5 m away from a pylon, the camera will not be able to focus at a zoom level greater than 14.2×.
 
Laser rangefinders measure distance using the time of flight of light. Their accuracy could be affected in environments where this ToF is affected: The range will be reduced in smoke, rain, snow, dust, and other environments, and data readings may be jumbled. 
When measuring an object with glass or transparent components:
If the glass is within moderate distance, the distance to the glass will be measured (not the object behind the glass) The glass may reflect the laser beam to other locations, resulting in the distance to other locations If the surface of the glass is very smooth or too close, the light will pass through the glass to detect the objects behind, but the range will be significantly reduced.
 
30 fps.
 
The accuracy is ±2 °C or ±2%, whichever is greater. (Measured at 25 °C in a windless laboratory, 5 m away from the black body). 
Note: black bodies have different emissivity levels, the measurement above is is based on the particular black body measured and for reference only.
 
The reflectivity of objects: shiny metals have higher reflectivity will result in lower accuracy and lower temperature readings.
The temperature of background radiation: a clear, sunny day will have less of an effect on accuracy than a cloudy day. 
Air temperature and humidity: the higher the temperature and humidity, the more likely the readings will be affected, and the lower the accuracy. 
Distance between the camera and the object: the farther away the object is from the camera, the lower the accuracy.
 
High gain mode: displays a smaller temperature measurement range at a high quality, the temperature measurement range is -40 °C to 150 °C.
Low gain mode: displays a larger temperature range at relatively lower quality, the temperature measurement range is -40 °C to 550 °C.
 
Yes. It supports 2×, 4×, and 8× digital zoom.
 
Flat-Field Calibration is used to optimize thermal image quality so temperature changes can be observed more easily. You can choose to manually enable FFC by turning off the automatic FFC adjustment in settings.
 
There are two ways: Spot Meter for measuring a single position, and Area Measurement for getting different readings in an area.
 
The Zenmuse H20T only has one model. Its thermal camera has a focal length of 13.5 mm (F1.0), equivalent focal length: 58mm, DFOV 40.6°
 
You can process them using DJI Thermal Analysis Tool. Download it here: https://www.dji.com/se/zenmuse-h20-series/download
 
The Zenmuse H20 Series is designed to prevent water damage to the camera components. But if the humidity is too high or if the payload is exposed to rain, water vapor could still enter the camera. Once powered on, the electrical components will heat up, causing the water vapor to evaporate, resulting in condensation or fog on the lens. This can usually be solved by turning on the aircraft/payload and waiting for the water vapor to dissipate. When not in use, we recommend you store the payload in a designated case or a cool, dry place with a relative humidity of less than 40%.
 
A protective material that protects against moisture is added between the lens and the protective glass to prevent moisture condensation on the protective glass. But it could be saturated with moisture if the humidity of the storage location is too high or if a wet payload is put back into the box. This could cause the protective glass to fog up, and it might take a while for the fog to dissipate once turned on. You can use a blow dryer to speed up the process. Again, we recommend wiping the payload dry after water exposure, and storing it in a designated case or a cool, dry place with a relative humidity of less than 40%.
 
In Night Scene Mode, the camera will switch the IR filter and adjust the ISP parameters to optimize for lowlight environments.
 
In DJI Pilot, by dragging to select an area in wide camera view, an image will be taken using the wide-angle camera while the gimbal rotates to automatically capture a series of photos at 20 MP of the selected area using the zoom camera at the current zoom level. All of the images captured will be stored in the same sub-folder on the SD card, generating an HTML file that can be opened in a web browser to view the overview image and the detailed close-up images.
 
128 GB. We recommend using a UHS-I Speed Grade 3 Micro SD card.
 
Currently, the Zenmuse H20 Series only supports the Android version of DJI Pilot.
 
Yes. Updating to the latest firmware version is required.
 
Yes. Updating to the latest firmware version is required.
 
They are compatible with the Matrice 300 RTK. Please update both the aircraft and the remote controller with the latest firmware.
 
They can both be mounted onto any one of the three gimbal ports on the M300 RTK.
 
Before upgrading, please ensure the aircraft is powered off, the payload is securely mounted onto the aircraft, the microSD card has enough storage space, and the intelligent flight battery has enough power.
Visit the official DJI website and enter the Downloads section of the Zenmuse H20 Series product page.
Download the latest firmware package.
Store the downloaded firmware package to the root folder of the microSD card.
Insert the microSD card into the microSD card slot on the payload.
Power on the aircraft, and the gimbal will start to perform a self-check, then automatically upgrade the firmware.
Please restart all devices after the upgrade completes.

Gimbal upgrade status description: 
4 short beeps ...new firmware detected, ready to upgrade.
2 long beeps …upgrading firmware, do not stop the update.
1 long beep followed by 2 short beeps… The firmware update was successful.
Continuous long beep... The firmware update failed, please try to update again. Contact DJI support for help if needed. 

Notes: 
• Please only store one version of firmware in the microSD card. Multiple versions of firmware stored in the microSD card will cause upgrade failure.
• Do not power off the aircraft or remove the payload from the aircraft during the upgrade, or it may damage the gimbal.
 
Do not aim the camera lens at high-energy power sources, such as the sun, lava, or laser beams. The temperatures of observation targets should not exceed 800 °C, or the camera could be irreversibly damaged.
Do not place the camera under direct sunlight, in places with poor ventilation, or near heaters.
Do not power on or off the camera too frequently. Please wait at least 30 seconds before restarting the camera, or it may affect the service life of camera chips.
Do not hot-swap the microSD card during use.
Do not touch the camera lens or scratch it with hard objects, as this could result in blurry images.
Please use a soft, dry cloth to clean the surface of the camera lens. Do not use alkaline detergents.
Please store the payload in a designated case that is kept dry and ventilated.
 
The Zenmuse H20 Series delivers useful insights in a variety of scenarios, for example, public safety applications including firefighting, fire prevention, search and rescue, and traffic law enforcement; energy industry application including asset and equipment inspection, geothermal energy exploration, and oil and gas inspection.
 
The Zenmuse H20 Series was not designed specifically to meet the accuracy requirements for aerial surveying, but you can use the wide-angle camera to capture images in Mapping missions in the DJI Pilot App.