✔ Sveriges snabbaste och bästa support på drönare.
✔ Officiell DJI butik.
✔ Lagar om olyckan är framme.
✔ Alltid först i Sverige med nya modeller.
✔ Snabb leverans.
DJI Zenmuse P1
- Stockholm (butik & online order): Ej på Lager
- Webblager (endast online order): 2
Det nya riktmärket för flygundersökning
Zenmuse P1 integrerar en fullbildssensor med utbytbara objektiv med fast fokus på en 3-axlig stabiliserad kardan. Designad för fotogrammetri-flyguppdrag, tar effektivitet och noggrannhet till en helt ny nivå.
Kameran kommer med ett 35mm objektiv.
Kontakta oss på enterprise@djistockholm.se för mer information.
Dela produkten
- Produktinformation
- Material
- VANLIGA FRÅGOR OCH SVAR
Produktinformation
Ditt överlägsna verktyg för Fotogrammetri
Extraordinär effektivitet
P1 har en fullbildssensor, brusfri, högkänslig sensor som kan ta ett foton i intervall på 0,7 s under flygningen och täcker upp till 3 km2 i en enda flygning.
Mycket hög noggrannhet
Zenmuse P1 är utrustad med en global mekanisk slutare och det helt nya TimeSync 2.0-systemet som synkroniserar tid över moduler på mikrosekundnivå. Du får centimeterprecision på din data kombinerat realtidspositionskompensering.
Robust mångsidighet
Skapa 2D-, 3D- och detaljerade modeller tack vare den integrerade 3-axliga gimbalen som kan utrustas med 24/35/50mm linser och Smart Oblique Capture-funktionen.


Smart Oblique Capture
Täck upp till 7,5 km2 på en enda arbetsdag med P1. Förbättra effektiviteten vid snedbilds fotografering med "Smart Oblique Capture", där gimbalen automatiskt roterar för att ta bilder i de olika vinklar som behövs. Endast foton som är väsentliga för 3D modellen kommer att tas vid kanten av flygområdet, vilket ökar effektiviteten vid efterbehandlingen med 20% till 50%.
Smart Data Management
Hanterar din resultatdata på ett smartare sätt
Uppdragets resultatfiler associeras automatiskt med uppdragets namn och uppdragstid.
Förutom Standard-tjänsten inkluderar Premium-tjänsten ersättningstjänster för kärnkomponenter, vilket gör att drönaren kan flyga med ett mer stabilt och robust driftsystem.
Smart Data Management
Verifiera datakvaliteten omedelbart efter flygningen genom att kontrollera positionsdata och antal tagna bilder, samt RTK-status och positioneringsnoggrannhet.
Fieldwork Report
Verifiera datakvaliteten omedelbart efter flygningen genom att kontrollera positionsdata och antal förvärvade bilder, samt RTK-status och positioneringsnoggrannhet.
Material
VANLIGA FRÅGOR OCH SVAR
- General
-
The P1 takes photos with a resolution of 8192 * 5460, or approximately 45 megapixels.
-
The P1 supports the following image/video formats:
· Images: JPEG, JPEG+DNG;
· Videos: MP4. -
The shortest continuous shooting interval of the P1 is 0.7 seconds.
-
1/2000s — 1/8s.
-
The single pixel size of the P1 is 4.4μm.
-
The P1 supports 24mm, 35mm and 50mm lenses with DL mounts.
-
No, currently the P1 supports only three industry-specific lenses. The lenses of the P1 are optimized for surveying and mapping scenarios, including optical parameter writing, lens performance recording, and reminders. Lenses with other DL mounts can take photos and videos manually when installed on the the Zenmuse P1 camera but cannot support surveying and mapping.
-
Currently, only the The M300 RTK supports the P1. The P1 can be installed only on the No. 1 gimbal port while the The M300 RTK is in Single Gimble mode.
-
In photos taken by the P1, the exit pupil position at the center of the camera lens is recorded.
-
In Smart Oblique Capture, the P1 adopts a shooting order of nadir, front, left, back, and right. This is the optimal shooting order for oblique photogrammetry data collection.
-
During Smart Oblique Capture, the tilt angle range of the P1 is from -60° to -90°.
-
The relationship between the ground sample distance and the flying altitude differs between lenses as follows:
· 24mm lens: GSD=H/55
· 35mm lens: GSD=H/80
· 50mm lens: GSD=H/120
Where GSD is measured in centimeters (cm) and the target distance (H) is measured in meters (m). -
No, zooming is not currently supported. Auto focus can be used when in Route mode. Manual focus is required when in Manual mode.
-
The Low-noise and high-sensitivity mode of the P1 can improve the camera sensitivity (ISO) while reducing noise levels.
-
The P1 can be used in multiple surveying and mapping scenarios including:
· 2D orthomosaic
· 3D oblique
· Detailed modeling
· Real-time mapping -
After a flight mission is completed, a field work report is generated for pilots to quickly confirm the quality of field data on site. Information includes:
· The location of each photo;
· The number of photos;
· The RTK positioning status and location accuracy. -
The P1 is connected to the payload health management system in DJI Pilot to record the following:
· Service time of devices
· Historical abnormal status
· Usage count of the shutter
· Swing count of the gimbal
Corresponding suggestions on abnormalities and maintenance are then provided to ensure the best performance. -
Yes. The task folder stores photos, original GNSS observations, and TimeStamps.MRK files, which are used for PPK post-processing calculations.
-
Currently, only DJI Pilot is supported.
-
The P1 supports the following operating modes:
· Aerial photography
· Oblique photography
· Corridor mapping flight
· Waypoint flight
· Manual operation -
The following TimeSync 2.0 features are available:
• Output the exposure time interval in microseconds;
• Time synchronization for the camera, the gimbal, the flight control system, and RTK;
• Brand new position and orientation compensation function which writes precise exit pupil positions of the camera into the photos based on the positions and orientations of the drone and the gimbal.